Aston Martin Virage Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Aston Martin Virage
The Aston Martin Virage was presented at the Birmingham Motorshow in 1988. This car was esigned by John Heffernan and Ken Greeley and was praised for its fresh contemporary styling. It proved to be quieter and more comfortable than the earlier V8s and was indeed the first truly new Aston Martin in nearly 20 years. A new generation Virage was introduced at the 2011 Geneva Motor Show. The Virage did not become available in the United States until the summer of 1990 and the Virage Volante convertible until 1992.Aston Martin Virage FAQ's
How do I check the battery level in my Aston Martin Virage?
To check the battery level in an Aston Martin Virage, connect a voltmeter to the battery terminals. The voltage should be between 12.4 and 12.7 volts. Proper battery maintenance and testing is essential for ensuring reliable starting and electrical system performance.
How do I check the brake pads on my Aston Martin Virage?
To check the brake pads on an Aston Martin Virage, remove the wheel and inspect the brake pads for wear. If the pads are less than 3mm thick, they should be replaced. Proper brake pad maintenance is essential for ensuring safe braking and preventing damage to the brake system.
How do I check the engine coolant level in my Aston Martin Virage?
To check the engine coolant level in an Aston Martin Virage, wait until the engine is cool and remove the radiator cap. The coolant level should be at or above the minimum line. Proper engine coolant maintenance is essential for preventing overheating and engine damage.
How do I check the power steering fluid level in my Aston Martin Virage?
To check the power steering fluid level in an Aston Martin Virage, locate the power steering fluid reservoir and remove the cap. The fluid level should be at or above the minimum line. Proper power steering fluid maintenance is essential for ensuring optimal steering performance.
How do I check the suspension on my Aston Martin Virage?
To check the suspension on an Aston Martin Virage, inspect the shocks, struts, and springs for signs of wear or damage. Also, check the alignment and tire wear. Proper suspension maintenance is essential for ensuring optimal handling and ride comfort.
How do I check the transmission fluid in my Aston Martin Virage?
To check the transmission fluid in an Aston Martin Virage, start the engine and let it idle in neutral for a few minutes. Park the car on a level surface and remove the dipstick. Wipe it clean, reinsert it, and check the fluid level. The level should be between the min and max marks on the dipstick.
How do I replace the air filter in my Aston Martin Virage?
To replace the air filter in an Aston Martin Virage, remove the air filter cover and old filter. Install the new filter and replace the cover. A dirty air filter can reduce engine performance and fuel efficiency, so it is important to replace it regularly.
How do I replace the battery in my Aston Martin Virage?
To replace the battery in an Aston Martin Virage, remove the old battery and install the new one. It is important to use the correct battery type and size for the vehicle. Proper battery maintenance and replacement is essential for ensuring reliable starting and electrical system performance.
How do I replace the cabin air filter in my Aston Martin Virage?
To replace the cabin air filter in an Aston Martin Virage, locate the filter housing under the dashboard on the passenger side. Remove the old filter and install the new one. Proper cabin air filter maintenance is essential for ensuring fresh, clean air inside the vehicle.
How do I replace the spark plugs in my Aston Martin Virage?
To replace the spark plugs in an Aston Martin Virage, remove the ignition coils and old spark plugs. Install new spark plugs and ignition coils. Proper spark plug maintenance is essential for ensuring optimal engine performance and fuel efficiency.
How do I replace the wiper blades on my Aston Martin Virage?
To replace the wiper blades on an Aston Martin Virage, lift the wiper arm away from the windshield and press the release tab on the wiper blade. Slide the blade off the arm and install the new blade. Proper wiper blade maintenance is essential for ensuring clear visibility in inclement weather.
How do I reset the service indicator on my Aston Martin Virage?
To reset the service indicator on an Aston Martin Virage, turn the ignition to the on position. Press and hold the trip button until the service message disappears. Release the button and turn off the ignition. Properly resetting the service indicator helps to ensure timely maintenance and prevent potential issues.
How often should I change the oil in my Aston Martin Virage?
The oil in an Aston Martin Virage should be changed every 7,500 miles or once a year, whichever comes first. Regular oil changes help to keep the engine running smoothly and can prevent costly repairs down the line. It is important to use the recommended oil type and specification for the vehicle.
What is the recommended tire pressure for an Aston Martin Virage?
The recommended tire pressure for an Aston Martin Virage is 32 psi in the front and 36 psi in the rear. Proper tire pressure is critical for ensuring optimal handling and performance of the vehicle. It is important to check tire pressure regularly and adjust as needed.
What type of coolant should I use in my Aston Martin Virage?
The recommended coolant for an Aston Martin Virage is a 50/50 mixture of ethylene glycol and distilled water. It is important to use the correct coolant to prevent damage to the engine and ensure optimal performance. Coolant should be checked and replaced as needed.
Aston Martin Virage Misc Document
- (Free)
-
- Aston Martin Virage Misc Documents Brochure
- (62 Pages)
- (Free)
- (Free)
- (Free)
- (Free)
- (Free)
- (Free)
