Brilliance BC3 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Brilliance BC3

The Brilliance BC3 is a sport compact sized coupé manufactured by the Brilliance Auto in the People's Republic of China. It was officially launched at the Geneva Motor Show in 2007. The BC3 was designed by Pininfarina, the chassis was developed with assistance from Porsche Engineering and the engine developed with FEV Inc. The BC3 is powered by a Brilliance designed 1.8L turbo 4-cylinder petrol engine, producing 125 kW, resulting in a top speed of 210 km/h. It is sold in Egypt as the Brilliance Kouper and in China as the Brilliance M3.

Brilliance BC3 FAQ's

How do I check the brake fluid level in my Brilliance BC3?

Check the brake fluid level in your Brilliance BC3 when the engine is cold and the vehicle is on a level surface. Locate the brake fluid reservoir under the hood and check the level against the minimum and maximum markings on the side of the reservoir. If the level is low, add brake fluid that meets the manufacturer's specifications.

How do I check the coolant level in my Brilliance BC3?

Check the coolant level in your Brilliance BC3 when the engine is cold. Locate the coolant reservoir under the hood and check the level against the minimum and maximum markings on the side of the reservoir. If the level is low, add a mixture of coolant and water in a 50:50 ratio until it reaches the maximum marking.

How do I check the power steering fluid level in my Brilliance BC3?

Check the power steering fluid level in your Brilliance BC3 when the engine is cold and the vehicle is on a level surface. Locate the power steering fluid reservoir under the hood and check the level against the minimum and maximum markings on the side of the reservoir. If the level is low, add power steering fluid that meets the manufacturer's specifications.

How do I check the tire pressure on my Brilliance BC3?

Check the tire pressure on your Brilliance BC3 when the tires are cold and the vehicle is on a level surface. Use a tire pressure gauge to check the pressure in each tire and compare it to the recommended pressure in the owner's manual or on the tire information label. If the pressure is low, add air until it reaches the recommended level.

How do I check the transmission fluid level in my Brilliance BC3?

Check the transmission fluid level in your Brilliance BC3 when the engine is running and the transmission is in park or neutral. Locate the dipstick under the hood and pull it out. Wipe it clean with a cloth, reinsert it, and pull it out again. Check the level against the markings on the dipstick and add more fluid if necessary.

How do I replace the air filter on my Brilliance BC3?

To replace the air filter on your Brilliance BC3, locate the air filter housing under the hood. Remove the clips or screws that hold the housing cover in place and lift the cover off. Remove the old air filter and install the new one, making sure it is properly seated. Reinstall the housing cover and secure it with clips or screws.

How do I replace the battery on my Brilliance BC3?

To replace the battery on your Brilliance BC3, locate the battery under the hood and remove the negative and positive terminals using a wrench or pliers. Remove the battery hold-down bracket and lift the battery out. Install the new battery, making sure the terminals are properly connected and tightened. Reinstall the hold-down bracket.

How do I replace the brake pads on my Brilliance BC3?

To replace the brake pads on your Brilliance BC3, remove the wheel and locate the brake caliper. Use a C-clamp or brake piston tool to compress the piston back into the caliper. Remove the old brake pads and install the new ones, making sure they are properly seated. Reinstall the caliper and wheel, then pump the brake pedal to restore pressure.

How do I replace the cabin air filter on my Brilliance BC3?

To replace the cabin air filter on your Brilliance BC3, locate the cabin air filter housing under the dashboard on the passenger side. Remove the cover and the old filter. Install the new filter, making sure it is properly seated and facing the right direction. Reinstall the cover.

How do I replace the fuel filter on my Brilliance BC3?

To replace the fuel filter on your Brilliance BC3, locate the fuel filter under the vehicle near the fuel tank. Use a wrench to disconnect the fuel lines from the filter and remove the old filter. Install the new filter, making sure the arrows on the filter point in the direction of fuel flow. Reconnect the fuel lines.

How do I replace the serpentine belt on my Brilliance BC3?

To replace the serpentine belt on your Brilliance BC3, locate the belt tensioner and use a wrench or socket to release the tension. Remove the old belt and install the new one, following the belt routing diagram under the hood. Release the tensioner and check the belt tension.

How do I replace the spark plugs on my Brilliance BC3?

To replace the spark plugs on your Brilliance BC3, locate the spark plug wires or coils and remove them from the spark plugs. Use a spark plug socket and ratchet to remove the old spark plugs and install the new ones, making sure they are properly gapped. Reinstall the spark plug wires or coils.

How often should I change the oil for my Brilliance BC3?

The oil change interval for your Brilliance BC3 depends on several factors such as driving conditions and mileage. However, it is recommended to change the oil every 5,000 miles or 6 months, whichever comes first. Regular oil changes help maintain engine performance and prolong engine life.

What type of engine oil should I use for my Brilliance BC3?

Use fully synthetic engine oil with a viscosity grade of 5W-30 for your Brilliance BC3. Avoid using conventional oil as it may not provide the same level of protection and performance. Always refer to the owner's manual for the recommended oil type and change interval.