Mazda 929 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Mazda 929

The Mazda 929 is a full-size car that was sold by the Japanese automobile manufacturer Mazda between 1973 and 1997. Mazda utilized the 929 nameplate for export markets only, badge engineering its Luce model until 1991, before transferring the name to export specification Sentia models. Between 1982 and 1987, Mazda also used the 929 nameplate for its Cosmo coupe in certain export markets. The final HE generation of the Sentia appeared in late 1995 in Asia and in Australia in April 1996.

Mazda 929 FAQ's

How do I change a flat tire on my Mazda 929?

To change a flat tire on your Mazda 929, start by locating the spare tire, jack, and lug wrench. Loosen the lug nuts before jacking up the car. Once the car is lifted, remove the lug nuts and take off the flat tire. Install the spare tire and hand-tighten the lug nuts. Lower the vehicle and then tighten the lug nuts with the lug wrench.

How do I change the cabin air filter on my Mazda 929?

To change the cabin air filter in your Mazda 929, start by locating the filter housing, which is typically located behind the glove compartment. Remove the access panel or clips to gain access to the filter. Take out the old filter and replace it with a new one, ensuring it is properly aligned. Reassemble the housing and test the air conditioning or heating system to confirm proper operation.

How do I change the oil in my Mazda 929?

To change the oil in your Mazda 929, start by locating the oil drain plug underneath the car. Use a wrench to remove the drain plug and let the old oil drain into a container. Once the oil has fully drained, replace the drain plug and remove the oil filter. Install a new oil filter, then refill the engine with the recommended amount and type of oil.

How do I check the tire pressure on my Mazda 929?

To check the tire pressure on your Mazda 929, start by locating a tire pressure gauge. Unscrew the valve cap from each tire and press the gauge onto the valve stem firmly. Read the pressure indicated on the gauge and compare it to the recommended tire pressure listed in the owner's manual or on a sticker located inside the driver's door jamb. Add or release air as needed to match the recommended pressure.

How do I diagnose and repair a faulty alternator in my Mazda 929?

When diagnosing a faulty alternator in your Mazda 929, start by checking the battery voltage with the engine off and then with the engine running. A healthy alternator should provide a voltage higher than the battery's resting voltage when the engine is running. If the alternator fails this test, it may need to be replaced. Consult a Mazda 929 automotive repair manual or seek professional assistance for the specific repair procedures.

How do I replace a broken side mirror on my Mazda 929?

To replace a broken side mirror on your Mazda 929, start by removing the interior door panel to access the mirror mounting bolts. Disconnect the electrical connector if applicable, then remove the bolts securing the mirror. Install the new mirror by reversing the steps and ensure it is securely attached. Test the mirror's functionality before completing the reassembly.

How do I replace a burnt-out headlight bulb on my Mazda 929?

To replace a burnt-out headlight bulb on your Mazda 929, start by accessing the headlight assembly from under the hood. Remove the electrical connector from the back of the bulb and then twist the bulb counterclockwise to remove it. Install the new bulb by reversing the steps and ensure it is properly secured. Test the headlights to confirm the replacement was successful.

How do I replace the brake pads on my Mazda 929?

To replace the brake pads on your Mazda 929, start by lifting the car using a jack and securing it with jack stands. Locate the brake caliper and remove the bolts holding it in place. Carefully remove the caliper and then the old brake pads. Install the new brake pads and reassemble the caliper, ensuring it is properly aligned. Finally, test the brakes before driving the vehicle.

How do I reset the maintenance light on my Mazda 929?

To reset the maintenance light on your Mazda 929, start by turning the ignition to the "on" position without starting the engine. Press and hold the trip/reset button located on the instrument panel until the maintenance light starts flashing. Release the button and turn off the ignition. The maintenance light should now be reset.

How do I troubleshoot a faulty electrical system in my Mazda 929?

When troubleshooting a faulty electrical system in your Mazda 929, start by checking the fuses to ensure they are not blown. Inspect the battery terminals for corrosion or loose connections. Use a multimeter to test the voltage at various points in the electrical system, such as the battery, alternator, and starter. If the issue persists, it is recommended to consult a Mazda 929 automotive repair manual or seek professional assistance.

How often should I replace the air filter in my Mazda 929?

The air filter in your Mazda 929 should be replaced according to the manufacturer's recommendation, which is typically every 15,000 to 30,000 miles or as stated in the owner's manual. However, if you frequently drive in dusty or polluted areas, it is advisable to check and replace the air filter more frequently to maintain optimal engine performance.

How often should I replace the timing belt in my Mazda 929?

The timing belt in your Mazda 929 should be replaced according to the manufacturer's recommended interval, which is typically around 60,000 to 100,000 miles or as stated in the owner's manual. It is crucial to replace the timing belt within the specified interval to prevent potential engine damage if the belt were to fail.

What should I do if my Mazda 929's check engine light comes on?

If the check engine light in your Mazda 929 comes on, it is advisable to have the vehicle inspected by a qualified mechanic. The check engine light indicates that there may be an issue with the engine or emissions system. Continuing to drive the vehicle without addressing the underlying problem could potentially cause further damage.

What should I do if my Mazda 929's engine overheats?

If your Mazda 929's engine overheats, the first step is to pull over to a safe location and turn off the engine. Allow it to cool down before attempting to check the coolant level or open the radiator cap. Once it has cooled down, check the coolant level and add more if necessary. If the issue persists, it is recommended to have your vehicle inspected by a professional mechanic.

What type of transmission fluid should I use for my Mazda 929?

For your Mazda 929, it is recommended to use automatic transmission fluid that meets the specifications outlined in the owner's manual. Consult the manual for the specific viscosity and type of transmission fluid suitable for your vehicle. It is crucial to use the correct fluid to ensure smooth operation and longevity of the transmission.

Mazda 929 Manuals Index

Mazda 929 Workshop Manual

Mazda 929 Owners Manual

Mazda 929 Misc Document

Related Models

Mazda 929 on Amazon

Mazda 1978-89 Chilton Repair Manual: All U.S. and Canadian Models of RX-7, GLC, 323, 626, 929, MX-6, MPV (Chilton model specific automotive repair manuals)