Mercedes CL 500 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Mercedes CL 500

The Mercedes-Benz CL-Class was a line of luxury coupés produced by the German automaker Mercedes-Benz, produced from 1992 to 2013. The CL-Class was based on the S-Class full-size luxury sedan. The last generation of the CL-Class, C216, was available in four models: CL 500 (CL 550 in some markets, with standard 4MATIC in Canada and the USA), CL 600, CL 63 AMG and CL 65 AMG. Main competitors of the CL-Class in the luxury 2+2 coupe segment included the Aston Martin DBS, Bentley Continental GT, BMW 6 Series (particularly the M6), and the Ferrari 612. In 2014 it was replaced by the C217 S-Class Coupe. CL 500 was equipped with V8 5.0L engine and could reach 0-100km/h in 6.1 seconds. Its top speed is listed as 250 km/h.

Mercedes CL 500 FAQ's

How do I change the engine oil in a Mercedes CL 500?

To change the engine oil in a Mercedes CL 500, start by locating the oil drain plug underneath the engine and unscrewing it to allow the old oil to drain out. Once the oil has completely drained, replace the drain plug and move on to removing the oil filter, which is typically located at the top or side of the engine. After installing the new oil filter, carefully pour in the recommended type and amount of fresh engine oil, making sure not to overfill it.

How do I check and adjust the tire pressure in a Mercedes CL 500?

To check and adjust the tire pressure in a Mercedes CL 500, start by locating the tire pressure monitoring system (TPMS) button, typically found near the steering wheel. With the engine running, press the TPMS button to access the tire pressure menu on the instrument cluster. Follow the on-screen instructions to display the current tire pressures. If any of the tires require adjustment, use an air compressor or a tire inflator to add or release air as needed. Finally, recheck the tire pressures and ensure they are within the recommended range.

How do I diagnose and fix a Mercedes CL 500 with a faulty electrical system?

Diagnosing and fixing electrical issues in a Mercedes CL 500 can be complex, but there are a few steps you can take. Start by checking the fuse box for any blown fuses and replacing them if necessary. Next, inspect the battery terminals for corrosion and clean them if needed. If the issue persists, it may be necessary to use a diagnostic tool to identify any specific electrical faults and address them accordingly.

How do I inspect and replace the serpentine belt in a Mercedes CL 500?

To inspect and replace the serpentine belt in a Mercedes CL 500, start by locating the belt tensioner and using a wrench or socket to relieve tension on the belt. Once the tension is released, you can remove the old belt by sliding it off the pulleys. Before installing the new belt, thoroughly inspect the condition of the pulleys to ensure there are no signs of damage or excessive wear. Finally, route the new belt around the pulleys according to the correct diagram and release the tensioner to apply proper tension.

How do I properly maintain the leather seats in a Mercedes CL 500?

Proper maintenance of the leather seats in a Mercedes CL 500 is essential to preserve their appearance and longevity. Start by vacuuming any loose debris from the seats and then use a mild leather cleaner and a soft cloth to remove dirt and stains. Once clean, apply a leather conditioner to keep the seats moisturized and prevent cracking or fading. It is also advisable to avoid exposing the seats to direct sunlight and extreme temperatures, as this can accelerate wear and damage the leather.

How do I replace a burnt-out headlight bulb in a Mercedes CL 500?

To replace a burnt-out headlight bulb in a Mercedes CL 500, start by opening the hood and locating the back of the headlight assembly. Carefully disconnect the wiring harness connector from the back of the bulb. Depending on the specific model year, you may need to remove a plastic cover or twist the bulb socket counterclockwise to access the bulb. Once the bulb is accessible, remove it from the socket, insert the new bulb, and secure it in place. Reconnect the wiring harness and test the headlights before closing the hood.

How do I reset the service indicator on a Mercedes CL 500?

To reset the service indicator on a Mercedes CL 500, start by turning the ignition to the "on" position without starting the engine. Use the steering wheel buttons to navigate to the "Service" menu on the instrument cluster. Once in the menu, scroll to the "Reset" option and press and hold the OK button until the indicator resets. Finally, turn off the ignition and start the vehicle to verify that the service indicator has been successfully reset.

How do I reset the tire pressure monitoring system (TPMS) in a Mercedes CL 500?

To reset the tire pressure monitoring system (TPMS) in a Mercedes CL 500, start by ensuring all the tires are properly inflated to the recommended pressure. Then, drive the vehicle at speeds above 20 mph for at least 10 minutes, allowing the TPMS to recalibrate and detect the tire pressures. If the TPMS warning light remains illuminated after this process, it may be necessary to use a TPMS tool or visit a dealership to diagnose and address any underlying issues with the system.

How do I troubleshoot a malfunctioning power window in a Mercedes CL 500?

When troubleshooting a malfunctioning power window in a Mercedes CL 500, start by checking the fuse box for any blown fuses related to the power windows. If the fuses are intact, try operating the window from both the driver's master control panel and the individual door switch to determine if the issue is specific to one switch or affects all windows. If the window does not respond to any controls, it may be necessary to inspect and potentially replace the window regulator or motor.

How often should I replace the air filters in a Mercedes CL 500?

It is generally recommended to replace the air filters in a Mercedes CL 500 every 12,000 to 15,000 miles, or as advised by the vehicle's manufacturer. However, this interval may vary depending on driving conditions. Regularly inspecting the air filters for excessive dirt or damage is also important, as they may need to be replaced sooner if they are significantly clogged or compromised.

What are the common causes of a Mercedes CL 500 overheating?

There are several common causes of a Mercedes CL 500 overheating. One possible cause is a malfunctioning radiator, which may be clogged or leaking. Another common culprit is a faulty water pump that fails to circulate coolant properly. Additionally, a malfunctioning thermostat can cause the engine to overheat by not allowing coolant to flow when necessary.

What are the common causes of a Mercedes CL 500's check engine light coming on?

There are numerous potential causes for a Mercedes CL 500's check engine light to illuminate. Some common culprits include a faulty oxygen sensor, which can affect fuel efficiency and emissions control, or a loose or damaged gas cap, which can cause a leak in the fuel system. Additionally, issues with the ignition system, such as faulty spark plugs or ignition coils, can trigger the check engine light. It is recommended to have the vehicle's onboard diagnostic system scanned to retrieve the specific error code and determine the exact cause.

What are the common signs of a failing fuel pump in a Mercedes CL 500?

Several signs indicate a failing fuel pump in a Mercedes CL 500. One common symptom is difficulty starting the engine, as the pump may struggle to deliver the necessary fuel pressure. Another sign is a loss of power during acceleration or while driving at higher speeds. Additionally, if you notice a sudden decrease in fuel efficiency or hear unusual noises coming from the fuel tank, it could indicate a problem with the fuel pump.

What steps should I follow to replace the brake pads on a Mercedes CL 500?

To replace the brake pads on a Mercedes CL 500, start by safely lifting the vehicle and removing the wheels. Locate the brake caliper and remove the retaining bolts, allowing you to access the brake pads. Carefully remove the old pads and install the new ones, ensuring they are properly aligned. Finally, reassemble the brake caliper and wheels, and test the brakes before driving the vehicle.

What type of coolant should I use in a Mercedes CL 500?

It is crucial to use the correct type of coolant in a Mercedes CL 500 to ensure optimal performance and prevent damage. The recommended coolant for most Mercedes models, including the CL 500, is a high-quality ethylene glycol-based antifreeze with a mix ratio of 50% coolant and 50% distilled water. It is essential to avoid using incompatible coolant types or tap water, as they can lead to cooling system corrosion and potential engine damage.

Mercedes CL 500 Manuals Index

Mercedes CL 500 Workshop Manual

Mercedes CL 500 Owners Manual

Related Models

Mercedes CL 500 on Amazon

MERCEDES-BENZ, The modern SL cars, The R107 and C107: From the 350SL/SLC to the 560SL and 500 Rally