Mitsubishi Space Wagon Workshop Manuals and Repair Manuals

To replace a blown fuse in your Mitsubishi Space Wagon, start by locating the fuse box, which is usually located under the dashboard or in the engine compartment. Consult your vehicle's manual to identify the specific fuse corresponding to the malfunctioning component. Use a fuse puller or a pair of needle-nose pliers to remove the blown fuse and replace it with a new fuse of the same rating. Ensure the new fuse is seated securely, then test the component to verify if the issue is resolved.

To change the air filter in your Mitsubishi Space Wagon, locate the air filter housing, which is typically located in the engine compartment. Unclip or unscrew the housing cover to access the air filter. Remove the old filter and replace it with a new one of the same size and type. Ensure the filter is properly secured in place, then reattach the housing cover. Regularly replacing the air filter helps maintain proper airflow to the engine, improving performance and fuel efficiency.

To change the oil in your Mitsubishi Space Wagon, first make sure you have the appropriate tools and a new oil filter. Locate the oil drain plug underneath the engine and place a drain pan beneath it. Remove the drain plug, let the old oil drain completely, then replace the drain plug and remove the old oil filter. Install a new filter, tighten it securely, and then refill the engine with the recommended amount and type of oil.

If your Mitsubishi Space Wagon's battery dies, you can jump-start the vehicle using jumper cables and another vehicle with a charged battery. Park the assisting vehicle close to your Space Wagon, making sure both vehicles are turned off. Connect the positive (red) jumper cable to the positive terminals of the batteries in both vehicles, then attach the negative (black) cable to the negative terminal of the assisting vehicle's battery. Attach the other end of the negative cable to a metal surface on your Space Wagon, away from the battery. Start the assisting vehicle and let it run for a few minutes, then attempt to start your Space Wagon. If it starts, leave it running for a while to allow the battery to recharge.

If your Mitsubishi Space Wagon's engine overheats, the first step is to safely pull over to the side of the road and turn off the engine. Allow the engine to cool down before attempting any further actions. Check the coolant level and, if it's low, add coolant to the reservoir. If the problem persists, it's advisable to have your vehicle inspected by a qualified mechanic to identify and address any underlying issues causing the overheating.