Peugeot 304 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Peugeot 304
The Peugeot 304 is a small family car introduced to the public at the Paris Motor Show in September 1969 by the French car manufacturer Peugeot. It was manufactured as a four-door saloon, 40door estate, two-door coupe, 2-door convertible and a two-door van. The 304 was launched with an all alloy SOHC four-cylinder 1288 cc petrol engine (XL3). A 1357 cc diesel engine became available for the saloon from July 1976, and for the estate and "fourgonette" van two months later. In July 1979, a larger 1548 cc diesel engine was offered; this was the engine also installed in early versions of the Peugeot 305.Peugeot 304 FAQ's
How do I change the air filter in a Peugeot 304?
To change the air filter in a Peugeot 304, locate the air filter housing, which is typically located near the engine. Open the housing and carefully remove the old air filter by releasing the clips or screws securing it. Clean the housing and install the new air filter, ensuring it fits securely. Finally, close the housing and make sure all connections are tight.
How do I change the brake pads in a Peugeot 304?
To change the brake pads in a Peugeot 304, start by safely jacking up the vehicle and removing the wheel. Locate the brake caliper, remove the retaining bolts, and carefully lift the caliper off the brake rotor. Slide out the old brake pads and install the new ones, ensuring they fit correctly in the caliper. Reinstall the caliper, tighten the retaining bolts, and repeat the process for the other wheels. Finally, pump the brake pedal a few times to restore proper brake pressure.
How do I check and adjust the ignition timing in a Peugeot 304?
To check and adjust the ignition timing in a Peugeot 304, start by warming up the engine to operating temperature. Locate the ignition timing marks on the crankshaft pulley and the timing scale on the engine block. Use a timing light to aim at the timing marks and adjust the distributor accordingly, following the specifications provided in the Peugeot 304 automotive repair manual. Recheck the timing after adjustments and tighten the distributor securely.
How do I perform a basic engine tune-up on a Peugeot 304?
Performing a basic engine tune-up on a Peugeot 304 involves several steps. Start by replacing the spark plugs, inspecting and replacing the ignition wires if necessary, checking and adjusting the ignition timing, cleaning or replacing the air filter, and inspecting the fuel system components. Additionally, it is important to inspect and replace the engine belts, hoses, and fluids, as well as performing a thorough visual inspection of the engine for any signs of wear or damage. Consult the Peugeot 304 automotive repair manual for detailed instructions and specifications specific to your model.
How do I replace a blown fuse in a Peugeot 304?
To replace a blown fuse in a Peugeot 304, locate the fuse box, which is usually located in the engine compartment or under the dashboard. Identify the fuse corresponding to the specific component that is not functioning and use a fuse puller or a pair of needle-nose pliers to remove the blown fuse. Replace it with a fuse of the same amperage rating and ensure it fits securely. Test the component to verify if the issue is resolved.
How do I replace a headlight bulb in a Peugeot 304?
To replace a headlight bulb in a Peugeot 304, open the hood and locate the back of the headlight assembly. Twist the bulb socket counterclockwise to remove it from the assembly. Gently pull out the old bulb and replace it with a new one, being careful not to touch the glass part with bare hands. Reinsert the bulb socket into the headlight assembly and twist it clockwise to secure it. Test the headlight to ensure it is functioning properly.
How do I reset the maintenance light in a Peugeot 304?
To reset the maintenance light in a Peugeot 304, turn the ignition key to the "ON" position without starting the engine. Press and hold the trip meter reset button, then turn the key to the "OFF" position. Continue holding the reset button for about 10 seconds until the maintenance light resets. Release the button and start the engine to verify if the maintenance light has been successfully reset.
How do I troubleshoot a malfunctioning power window in a Peugeot 304?
If a power window in a Peugeot 304 is not functioning, start by checking the fuse corresponding to the power window circuit. If the fuse is intact, check the window switch for any signs of damage or malfunction. If the switch is working correctly, it may be necessary to inspect the window motor and regulator for any faults. Consult the Peugeot 304 automotive repair manual for detailed troubleshooting steps and diagrams.
How often should I change the oil in a Peugeot 304?
The oil in a Peugeot 304 should be changed every 6,000 miles or every 6 months, whichever comes first. Regular oil changes are crucial to maintain engine performance and longevity. Following the recommended oil change interval will help ensure proper lubrication, prevent engine damage, and maintain the warranty.
How often should I check the coolant level in a Peugeot 304?
The coolant level in a Peugeot 304 should be checked regularly, ideally every month or before long trips. Maintaining the proper coolant level is crucial to prevent overheating and engine damage. It is important to check the coolant level when the engine is cold and to use the recommended coolant type specified in the owner's manual or the Peugeot 304 automotive repair manual.
How often should I replace the timing belt in a Peugeot 304?
The timing belt in a Peugeot 304 should be replaced every 60,000-80,000 miles or every 5-6 years, whichever comes first. The timing belt is a critical component that synchronizes the engine's camshaft and crankshaft, and a failure can cause significant engine damage. It is important to follow the recommended replacement interval mentioned in the Peugeot 304 automotive repair manual to prevent potential issues.
What is the recommended oil type for a Peugeot 304?
The recommended oil type for a Peugeot 304 is a high-quality, multi-grade engine oil with a viscosity of 10W-40 or 15W-40. This type of oil provides optimal lubrication and protection for the engine under various operating conditions. It is important to check the owner's manual or consult the Peugeot 304 automotive repair manual for specific oil recommendations.
What is the recommended spark plug gap for a Peugeot 304?
The recommended spark plug gap for a Peugeot 304 is typically between 0.7-0.8mm (0.028-0.032 inches), but it is important to consult the specific spark plug manufacturer's recommendations. Maintaining the correct spark plug gap is crucial for optimal combustion and engine performance. Always double-check the recommended gap in the Peugeot 304 automotive repair manual or consult a trusted mechanic.
What is the recommended tire pressure for a Peugeot 304?
The recommended tire pressure for a Peugeot 304 varies depending on the specific model and tire size. Generally, the recommended tire pressure ranges between 26-32 PSI (pounds per square inch) for the front tires and 28-34 PSI for the rear tires. It is important to check the owner's manual or the tire placard located on the driver's side door jamb for the exact tire pressure specifications.
Peugeot 304 on Amazon
Peugeot 304 Workshop Manual
-
- Peugeot 304 Workshop Manual French
- (576 Pages)
- (Free)
Peugeot 304 Misc Document
-
- Peugeot 304 Misc Documents Parts Catalogue
- (474 Pages)
- (Free)
Related Models
