Peugeot Partner Tepee Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Peugeot Partner Tepee
The new Peugeot Partner Tepee showcases a variety of major developments in style and technology, with new, state-of-the-art connected equipment features and a wide range of highly efficient engines delivering enhanced flexibility and freedom. The new style of the Partner Tepee demonstrates its thoroughly modern, robust personality: the radiator grill has a more vertical design, which dominates a taut-lined bumper with LED daytime running lights that sit neatly in the body work. The top-of-the-range Allure version has an even more confident style that firmly declares its adventurous personality. The new Partner Tepee comes fitted with latest-generation technology including the new 7" multi-media touch screen, Active City Brake (available from November 2015), reversing camera, front parking aid and Grip Control. Meanwhile, the new BlueHDi engines offer enhanced driving pleasure combined with optimised values for fuel consumption and CO2 emissions.Peugeot Partner Tepee FAQ's
How do I change a flat tire on my Peugeot Partner Tepee?
To change a flat tire on your Peugeot Partner Tepee, first, find a safe location to park the vehicle away from traffic. Locate the spare tire, jack, and lug wrench in the trunk or under the vehicle. Loosen the lug nuts before raising the vehicle with the jack. Once elevated, remove the lug nuts, replace the flat tire with the spare, tighten the lug nuts, and lower the vehicle.
How do I change the oil in my Peugeot Partner Tepee?
To change the oil in your Peugeot Partner Tepee, start by locating the oil drain plug underneath the engine. Use a wrench to remove the plug and let the old oil drain into a pan. Once drained, replace the drain plug and refill the engine with the recommended oil type and quantity specified in the manual.
How do I check the brake fluid level in my Peugeot Partner Tepee?
To check the brake fluid level in your Peugeot Partner Tepee, start by locating the brake fluid reservoir, usually located on the driver's side near the firewall. Ensure the vehicle is on a level surface and clean the area around the reservoir cap. Remove the cap and check the fluid level against the "MIN" and "MAX" markings on the reservoir. If the level is below the "MIN" mark, add the recommended brake fluid type until it reaches the proper level.
How do I check the coolant level in my Peugeot Partner Tepee?
To check the coolant level in your Peugeot Partner Tepee, park the vehicle on a level surface and wait for the engine to cool down. Locate the coolant reservoir, usually located near the radiator, and check the level against the "MIN" and "MAX" markings. If the level is below the "MIN" mark, add a 50/50 mixture of coolant and water to bring it to the recommended level.
How do I check the transmission fluid level in my Peugeot Partner Tepee?
To check the transmission fluid level in your Peugeot Partner Tepee, start by parking the vehicle on a level surface and engaging the parking brake. Locate the transmission dipstick, usually located near the engine. With the engine running and the transmission in "Park" or "Neutral," remove the dipstick, wipe it clean, reinsert it, and then remove it again to check the fluid level. The fluid level should be within the designated range indicated on the dipstick.
How do I jump-start my Peugeot Partner Tepee?
To jump-start your Peugeot Partner Tepee, start by locating the battery, usually located in the engine compartment. Ensure both vehicles are turned off, and connect one end of the positive (red) jumper cable to the positive terminal of the dead battery, and the other end to the positive terminal of the working battery. Connect one end of the negative (black) jumper cable to the negative terminal of the working battery, and the other end to a metal surface away from the dead battery. Start the engine of the working vehicle and let it run for a few minutes before attempting to start the dead vehicle.
How do I replace a blown fuse in my Peugeot Partner Tepee?
To replace a blown fuse in your Peugeot Partner Tepee, start by locating the fuse box, which is usually located in the engine compartment or under the dashboard. Use the fuse diagram in the manual to identify the fuse corresponding to the malfunctioning component. Use a fuse puller or a pair of needle-nose pliers to remove the blown fuse, and replace it with a new fuse of the same amperage rating.
How do I replace a headlight bulb in my Peugeot Partner Tepee?
To replace a headlight bulb in your Peugeot Partner Tepee, start by opening the hood and locating the back of the headlight assembly. Disconnect the electrical connector from the back of the bulb, then twist and remove the bulb holder. Remove the old bulb from the holder and replace it with a new one, making sure not to touch the glass part of the bulb with your bare hands. Reinsert the bulb holder into the headlight assembly, reconnect the electrical connector, and test the new bulb.
How do I replace the brake pads on my Peugeot Partner Tepee?
To replace the brake pads on your Peugeot Partner Tepee, start by securing the vehicle on a level surface and engaging the parking brake. Locate the brake caliper, remove the retaining bolts, and carefully retract the caliper piston using a C-clamp or a specialized brake caliper tool. Remove the old brake pads, install the new ones, and reassemble the caliper. Finally, pump the brake pedal a few times to ensure proper brake pad contact before driving.
How do I replace the cabin air filter in my Peugeot Partner Tepee?
To replace the cabin air filter in your Peugeot Partner Tepee, start by locating the filter housing, usually located behind the glove compartment or under the dashboard. Open the glove compartment and remove any contents. Release the tabs or screws securing the filter housing and remove the old filter. Install the new cabin air filter, ensuring it is properly aligned, and reassemble the filter housing. Finally, close the glove compartment and test the air circulation system to ensure proper operation.
How do I reset the service indicator light on my Peugeot Partner Tepee?
To reset the service indicator light on your Peugeot Partner Tepee, start by turning the ignition key to the "On" position without starting the engine. Press and hold the trip reset button on the instrument cluster until the display shows the reset menu. Use the trip reset button to navigate to the service indicator reset option, then confirm the reset by pressing and holding the button for a few seconds.
How often should I replace the air filter in my Peugeot Partner Tepee?
The air filter in your Peugeot Partner Tepee should be replaced approximately every 12,000 to 15,000 miles (or every 12 months) to ensure optimal engine performance. However, this can vary depending on driving conditions. If you frequently drive in dusty or polluted environments, it may be necessary to replace the air filter more frequently to prevent clogging and maintain proper airflow.
How often should I replace the spark plugs in my Peugeot Partner Tepee?
The spark plugs in your Peugeot Partner Tepee should generally be replaced every 30,000 to 45,000 miles (or every 3 to 5 years) to ensure optimal ignition and fuel efficiency. However, this can vary depending on factors such as driving conditions and the type of spark plugs used. Consult the manual for the manufacturer's specific recommendations for your vehicle.
What is the recommended tire pressure for my Peugeot Partner Tepee?
The recommended tire pressure for your Peugeot Partner Tepee can vary depending on factors such as load weight and driving conditions. However, as a general guideline, the recommended tire pressure for the front and rear tires is usually around 32 psi (pounds per square inch). It is always advisable to consult the manual for the specific tire pressure recommendations based on your vehicle configuration.
What is the towing capacity of my Peugeot Partner Tepee?
The towing capacity of your Peugeot Partner Tepee can vary depending on the engine and transmission configuration. However, as a general guideline, the towing capacity of the Tepee ranges from around 1,200 kg (2,646 lbs) to 1,500 kg (3,307 lbs), depending on the model. It is important to consult the manual or contact a Peugeot dealer to determine the exact towing capacity for your specific vehicle.
Peugeot Partner Tepee Manuals Index
Peugeot Partner Tepee on Amazon
Peugeot Partner Tepee Workshop Manual
-
- Peugeot Partner Tepee Workshop Manual Russian
- (2,016 Pages)
- (Free)
Peugeot Partner Tepee Owners Manual
-
- Peugeot Partner Tepee 2010 Owners Manual
- (232 Pages)
- (Free)
-
- Peugeot Partner Tepee 2013 Owners Manual
- (268 Pages)
- (Free)
-
- Peugeot Partner Tepee 2014 Owners Manual
- (268 Pages)
- (Free)
-
- Peugeot Partner Tepee 2015 Owners Manual
- (298 Pages)
- (Free)
Peugeot Partner Tepee Misc Document
- (Free)
Related Models
