Plymouth Prowler Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Plymouth Prowler

A retro styled production car manufactured in 1997 and 1999-2002 by Daimler Chrysler first as Plymouth Prowler and later as Plymouth marque was discontinued in 2001 the Prowler was sold as Chrysler Prowler for the 2001 and 2002 model years. The Prowler featured a powertrain from Chrysler's LH-cars, a 3.5 L Chrysler SOHC V6 engine 24v producing 214 hp (160 kW; 217 PS) at 5850 rpm. For the 1999 model year the engine was replaced with a more powerful, aluminum block, 253 hp (189 kW; 257 PS) at 6400 rpm version of the engine. Both engines were coupled to a 4-speed Auto-stick automatic transmission.

Plymouth Prowler FAQ's

How do I adjust the parking brake in a Plymouth Prowler?

To adjust the parking brake in a Plymouth Prowler, start by locating the parking brake lever or pedal. Underneath the vehicle, find the parking brake cable and locate the adjustment nut or mechanism. Turn the adjustment nut or mechanism to tighten or loosen the cable until the desired parking brake tension is achieved. Test the parking brake after adjustment to ensure proper functionality.

How do I change the oil in a Plymouth Prowler?

To change the oil in a Plymouth Prowler, first, locate the oil drain plug underneath the engine. Use a wrench to loosen and remove the plug, allowing the old oil to drain into a suitable container. Once the oil has completely drained, replace the drain plug and proceed to pour the recommended amount of fresh oil into the engine through the oil filler cap.

How do I replace a burnt-out headlight in a Plymouth Prowler?

To replace a burnt-out headlight in a Plymouth Prowler, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector and remove the retaining clip or screws securing the headlight in place. Carefully remove the old headlight and insert a new one, ensuring it is properly aligned. Secure the headlight with the retaining clip or screws and reconnect the electrical connector.

How do I replace a damaged side mirror in a Plymouth Prowler?

To replace a damaged side mirror in a Plymouth Prowler, start by carefully prying off the interior mirror cover to access the mounting screws or clips. Remove the screws or release the clips to detach the old mirror from the mounting bracket. Disconnect the electrical connector if applicable. Install the new mirror by aligning it with the mounting bracket and securing it with screws or clips. Reconnect the electrical connector if applicable and reattach the interior mirror cover.

How do I replace a dead battery in a Plymouth Prowler?

To replace a dead battery in a Plymouth Prowler, start by disconnecting the negative (-) battery cable, followed by the positive (+) cable. Remove any necessary components that may be blocking access to the battery. Carefully remove the old battery from its bracket and replace it with a new one, ensuring proper polarity. Reconnect the positive (+) cable first, followed by the negative (-) cable.

How do I replace a faulty ignition coil in a Plymouth Prowler?

To replace a faulty ignition coil in a Plymouth Prowler, start by disconnecting the negative (-) battery cable to prevent any electrical accidents. Locate the ignition coil, typically found near the engine, and remove any components blocking access to it. Disconnect the electrical connectors attached to the ignition coil and remove the mounting bolts securing it in place. Replace the old ignition coil with a new one, ensuring proper alignment and secure all components. Finally, reconnect the negative (-) battery cable.

How do I replace a malfunctioning fuel pump in a Plymouth Prowler?

To replace a malfunctioning fuel pump in a Plymouth Prowler, first, disconnect the negative (-) battery cable to prevent any electrical mishaps. Locate the fuel pump, usually found inside the fuel tank, and carefully remove the necessary components to gain access to it. Disconnect the electrical connectors and fuel lines attached to the pump. Replace the old fuel pump with a new one, ensuring it is properly secured. Reinstall all components and reconnect the negative (-) battery cable.

How do I replace a worn-out serpentine belt in a Plymouth Prowler?

To replace a worn-out serpentine belt in a Plymouth Prowler, locate the belt tensioner pulley and use a wrench to relieve tension on the belt. Carefully slide the old belt off the pulleys, noting the routing for proper installation of the new belt. Install the new belt by following the correct routing around the various pulleys. Use the belt tensioner pulley to apply tension to the new belt, ensuring it is properly seated on all pulleys.

How do I reset the maintenance light in a Plymouth Prowler?

To reset the maintenance light in a Plymouth Prowler, turn the ignition to the "On" position without starting the engine. Press and hold the "Trip" button on the instrument cluster until the maintenance light starts flashing. Release the button and start the engine. The maintenance light should now be reset. It is important to note that this procedure may vary slightly depending on the model year of the Plymouth Prowler.

How often should I replace the air filter in a Plymouth Prowler?

The air filter in a Plymouth Prowler should be replaced approximately every 12,000 to 15,000 miles or as recommended in the owner's manual. However, this frequency may vary depending on driving conditions and environment. Regularly inspect the air filter for signs of dirt, debris, or damage and replace it if necessary. A clean air filter ensures proper airflow to the engine, promoting efficient combustion and prolonging engine life.

What does it mean if the "Check Engine" light is illuminated in my Plymouth Prowler?

If the "Check Engine" light is illuminated in your Plymouth Prowler, it indicates that the vehicle's onboard diagnostic system has detected a potential issue with the engine or emissions system. It is recommended to have the vehicle diagnosed with a diagnostic scanner to retrieve the specific trouble codes. These codes will help identify the underlying problem, allowing for appropriate repairs to be made.

What is the recommended tire pressure for a Plymouth Prowler?

The recommended tire pressure for a Plymouth Prowler is typically found in the owner's manual or on a sticker located on the driver's side door jamb. It is essential to adhere to the manufacturer's recommended tire pressure to ensure optimal performance, fuel efficiency, and tire longevity. Use a tire pressure gauge to check the pressure regularly and adjust it as needed.

What should I do if the Plymouth Prowler is overheating?

If your Plymouth Prowler is overheating, it is crucial to address the issue promptly to prevent engine damage. Firstly, safely pull over and turn off the engine. Allow the vehicle to cool down before attempting any further actions. Check the coolant level and add coolant if necessary. If the problem persists, it is advisable to have a professional inspect the cooling system for any leaks or malfunctioning components.

What type of transmission fluid should I use in a Plymouth Prowler?

The type of transmission fluid to use in a Plymouth Prowler can vary depending on the model year and transmission type. It is crucial to consult the owner's manual or contact a certified Plymouth dealership to ensure the correct transmission fluid specification. Using the wrong type of fluid can lead to transmission damage and poor performance.

Why is my Plymouth Prowler's air conditioning not blowing cold air?

If your Plymouth Prowler's air conditioning is not blowing cold air, there could be several potential causes. Start by checking the refrigerant level to ensure it is at the proper level. If the refrigerant level is sufficient, inspect the compressor, condenser, and evaporator for any signs of damage or malfunction. It is recommended to have a professional diagnose and repair the issue to avoid further complications.