Rover 25 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Rover 25

The Rover 25 is a compact car produced under the British marque Rover since 1999. This is a facelifted version of Rover 200 Series. The 1.4 L, 1.6 L and 1.8 L petrol engines as well as the 2.0 L diesel were all carried over from the previous range. CVT automatic gearboxes were carried over from the R3 200, with 'Steptronic' (later 'Stepspeed' post-BMW demerger) semi-automatic system available from late 2000. R65 manual gearboxes were again carried over but were later superseded by Ford 'IB5' units in mid-2003.Due to a brief surge in sales among buyers wanting to support the company, it became Britain's bestselling new car for the month of April 2000 . However, sales quickly went back down to normal levels, and the 25 was never been able to seriously compete with its rivals, the Ford Fiesta and the Opel Corsa in terms of popularity since then.

Rover 25 FAQ's

How do I adjust the headlights on my Rover 25?

To adjust the headlights on your Rover 25, park the vehicle on a level surface facing a wall or garage door. Measure the distance from the ground to the center of each headlight and mark it on the wall. Turn on the headlights and locate the adjustment screws near the headlight assembly. Use a screwdriver or appropriate tool to adjust the vertical and horizontal aim of the headlights until the light beams align with the marked spots on the wall.

How do I change a headlight bulb in my Rover 25?

To change a headlight bulb in your Rover 25, start by opening the hood and locating the back of the headlight assembly. Twist and remove the bulb socket, then carefully remove the old bulb and replace it with a new one, making sure not to touch the glass part of the new bulb with your bare hands. Insert the bulb socket back into the headlight assembly and twist it to secure it in place. Test the new bulb before closing the hood to ensure it is functioning properly.

How do I change the oil in my Rover 25?

To change the oil in your Rover 25, locate the oil drain plug underneath the engine and remove it. Allow the old oil to drain completely before replacing the drain plug and tightening it. Then, remove the oil filter and replace it with a new one, making sure to lubricate the gasket with fresh oil before installation. Finally, refill the engine with the recommended amount and type of oil, checking the dipstick to ensure it is at the correct level.

How do I change the spark plugs in my Rover 25?

To change the spark plugs in your Rover 25, start by locating the spark plug wires or ignition coil packs. Disconnect them from the spark plugs by gently pulling them off. Use a spark plug socket and ratchet to remove the old spark plugs from the cylinder head. Install the new spark plugs, ensuring they are tightened to the manufacturer's specifications. Finally, reconnect the spark plug wires or ignition coil packs in the correct order.

How do I check the brake fluid level in my Rover 25?

To check the brake fluid level in your Rover 25, locate the brake fluid reservoir under the hood. The reservoir is typically translucent, allowing you to see the fluid level. Ensure the vehicle is on a level surface and remove the cap from the reservoir. The fluid level should be between the minimum and maximum marks on the reservoir. If the level is low, top it up with the recommended brake fluid, being careful not to spill any on the vehicle's paint as it can cause damage.

How do I replace the battery in my Rover 25?

To replace the battery in your Rover 25, start by locating the battery, usually found in the engine compartment. Disconnect the negative (-) cable first, followed by the positive (+) cable. Remove any securing brackets or clamps holding the battery in place, then carefully lift it out of the battery tray. Install the new battery, ensuring it is properly aligned, and secure it with the brackets or clamps. Finally, reconnect the positive (+) cable first, followed by the negative (-) cable.

How do I replace the cabin air filter in my Rover 25?

To replace the cabin air filter in your Rover 25, locate the filter housing, which is typically located behind the glove compartment or under the dashboard. Remove the cover or access panel to reveal the filter. Slide out the old filter and replace it with a new one, ensuring it is properly aligned. Reinstall the cover or access panel, and you will have a fresh cabin air filter that helps maintain clean air inside your vehicle.

How do I reset the service indicator on my Rover 25?

To reset the service indicator on your Rover 25, insert the key into the ignition and turn it to position 1, but do not start the engine. Within 5 seconds, press and hold the trip reset button located on the instrument cluster. While holding the button, turn the key to position 2. Continue holding the button until the service indicator light starts to flash, then release the button. The service indicator should now be reset.

How often should I change the transmission fluid in my Rover 25?

The recommended interval for changing the transmission fluid in your Rover 25 can vary depending on the specific model and driving conditions. However, as a general guideline, it is advisable to have the transmission fluid replaced every 30,000 to 60,000 miles. Regular maintenance of the transmission fluid helps ensure smooth shifting, prolongs the life of the transmission, and maintains optimal performance.

How often should I replace the air filter in my Rover 25?

The air filter in your Rover 25 should be replaced approximately every 12 months or every 12,000 miles, whichever comes first. However, if you drive in dusty or polluted environments, it may be necessary to replace it more frequently. A clogged or dirty air filter can restrict airflow to the engine, reducing performance and fuel efficiency, so regular replacement is important for optimal engine performance.

What is the recommended tire pressure for my Rover 25?

The recommended tire pressure for your Rover 25 can vary depending on the specific model and tire size. Generally, the recommended tire pressure is indicated on a sticker located on the driver's side door jamb or in the vehicle's manual. It is important to maintain the correct tire pressure as it ensures proper handling, tire wear, and fuel efficiency.

What should I do if my Rover 25 overheats?

If your Rover 25 overheats, the first step is to safely pull over to the side of the road and turn off the engine. Allow the engine to cool down before attempting any further troubleshooting. Check the coolant level and add coolant if necessary. If the problem persists, it is advisable to have the vehicle towed to a qualified mechanic to diagnose and repair the underlying cause of the overheating.

What should I do if my Rover 25 won't start?

If your Rover 25 won't start, there are several potential causes to consider. Start by checking if the battery is charged and properly connected. Inspect the fuses to ensure none are blown. Verify that there is fuel in the tank and that the fuel pump is working. If these basic checks do not solve the issue, it is recommended to have a professional mechanic diagnose and repair the problem.

What type of coolant should I use in my Rover 25?

For your Rover 25, it is recommended to use a high-quality ethylene glycol-based coolant with the appropriate mixture ratio of coolant to water, usually 50:50. This type of coolant provides the necessary protection against freezing, boiling, and corrosion. Make sure to consult your vehicle's manual or contact a Rover dealership to ensure you are using the correct coolant specific to your model and year.