Saab 9000 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Saab 9000

The Saab 9000 is an executive car that was produced by the Swedish company Saab from 1984 to 1998. Representing the company's foray into the executive car scene, the 9000 remained in production until it was replaced by the Saab 9-5 in late 1999. The 9000 was launched in 1984 as a five-door liftback. Saab Direct Ignition was fitted to the 9000 CD in 1988 on some models and expanded to all turbocharged 9000s in 1990. As early as 1989, the 9000 was equipped with the larger B234 2.3-litre engine, providing 150 hp (110 kW) in the normally aspirated engine. From late 1990, the B234 became available with a turbocharger, producing 147 kW (200 PS). It was available with manual and automatic gearbox.

Saab 9000 FAQ's

How do I change the fuel filter on my Saab 9000?

To change the fuel filter on your Saab 9000, locate the filter underneath the car near the fuel tank. Use a wrench to loosen the fuel line fittings and carefully remove the old filter. Install the new filter, making sure to tighten the fittings securely to prevent any fuel leaks.

How do I change the spark plugs on my Saab 9000?

To change the spark plugs on your Saab 9000, start by locating the spark plug wires or ignition coils. Disconnect them and use a spark plug socket and ratchet to remove the old plugs. Install the new spark plugs, making sure not to overtighten them. Reconnect the wires or coils, and repeat the process for the remaining spark plugs.

How do I check and top up the transmission fluid in my Saab 9000?

To check and top up the transmission fluid in your Saab 9000, start by locating the transmission dipstick, which is usually labeled and positioned near the engine. With the engine running and the transmission in park or neutral, remove the dipstick, wipe it clean, and reinsert it fully. Pull it out again and check the fluid level against the markings on the dipstick. If needed, add the recommended transmission fluid through the dipstick tube using a funnel.

How do I diagnose a faulty alternator in my Saab 9000?

To diagnose a faulty alternator in your Saab 9000, you can start by checking the battery voltage with a multimeter when the engine is off and then again when it's running. If the voltage is significantly lower when the engine is running, it indicates a potential alternator problem. You can also inspect the alternator belt for proper tension and signs of wear. If you suspect a faulty alternator, it's advisable to have it tested by a professional using specialized equipment.

How do I replace a blown fuse in my Saab 9000?

To replace a blown fuse in your Saab 9000, locate the fuse box, which is typically found in the passenger compartment or the engine bay. Identify the fuse corresponding to the malfunctioning electrical component and carefully remove it using a fuse puller or a pair of needle-nose pliers. Replace the blown fuse with a new one of the same rating and ensure it is properly seated.

How do I replace a faulty headlight bulb on my Saab 9000?

To replace a faulty headlight bulb on your Saab 9000, open the hood and locate the backside of the headlight assembly. Depending on your model, you may need to remove a cover or rubber seal to access the bulb. Disconnect the electrical connector, remove the old bulb, and replace it with a new one. Reconnect the electrical connector, secure any covers or seals, and test the headlight before closing the hood.

How do I replace a faulty radiator in my Saab 9000?

To replace a faulty radiator in your Saab 9000, first, drain the coolant by opening the drain valve or removing the lower radiator hose. Remove any necessary components, such as the fan or shroud, that may obstruct access to the radiator. Disconnect the hoses and transmission cooler lines, and then remove the mounting bolts securing the radiator. Install the new radiator, reconnect the hoses and lines, refill the coolant, and check for any leaks.

How do I replace a worn serpentine belt on my Saab 9000?

To replace a worn serpentine belt on your Saab 9000, locate the belt tensioner and use a wrench or socket to relieve tension on the belt. Slide the belt off the pulleys, making note of the routing for easier installation of the new belt. Install the new belt by following the correct routing and release the tensioner to apply proper tension. Verify that the belt is properly seated on all pulleys before starting the engine.

How do I replace the brake pads on my Saab 9000?

To replace the brake pads on your Saab 9000, first, safely lift the car and remove the wheels. Locate the brake caliper and remove the bolts holding it in place. Slide out the old brake pads and replace them with new ones. Reinstall the caliper, tighten the bolts, and repeat the process for the other wheels.

How do I reset the check engine light on my Saab 9000?

To reset the check engine light on your Saab 9000, you can try disconnecting the car's battery for a few minutes and then reconnecting it. This may clear the stored fault codes. However, it's essential to address the underlying issue that triggered the check engine light in the first place. If the light persists after resetting, it's recommended to have the vehicle diagnosed by a professional.

How do I troubleshoot a malfunctioning air conditioning system in my Saab 9000?

If your Saab 9000's air conditioning system is not working properly, start by checking the refrigerant level. If it's low, you may have a leak that needs to be repaired. Additionally, check the fuses, relays, and the condition of the compressor. If these basic checks don't resolve the issue, it's recommended to consult the Saab 9000 repair manual for further troubleshooting steps.

How often should I replace the timing belt on my Saab 9000?

The timing belt on your Saab 9000 should be replaced according to the manufacturer's recommended interval, typically between 60,000 and 100,000 miles. It's crucial to replace the timing belt within the specified timeframe to prevent potential engine damage if it fails. Consult your Saab 9000 repair manual for the exact replacement interval for your specific model year.

What could be causing a rough idle in my Saab 9000?

A rough idle in your Saab 9000 could be caused by various factors such as a vacuum leak, faulty ignition components, clogged fuel injectors, or a malfunctioning idle control valve. It's advisable to inspect and address these potential issues one by one, starting with a thorough inspection of the vacuum lines and checking for any signs of wear or leaks.

What is the recommended tire pressure for my Saab 9000?

The recommended tire pressure for your Saab 9000 can usually be found on a sticker inside the driver's side door jamb or in the owner's manual. It's important to maintain the correct tire pressure to ensure proper handling, fuel efficiency, and tire longevity. Check the tire pressure regularly and adjust as needed.

What type of oil should I use for my Saab 9000?

For optimal performance, it is recommended to use a high-quality synthetic oil with the correct viscosity grade specified in your Saab 9000 owner's manual. Synthetic oils offer better protection and longer service life compared to conventional oils. Always check the oil level regularly and change it at the recommended intervals.